Search

Veilig betalen


Motors


SMALL ELECTRONIC MOTORS





Vibration motor 1.5V - 3 V

Vibration motor 1.5V - 3 V



Micro vibration motor with weight- 1.5V to 3V DC 

A small motor with excentric weight for vibration. Used in all kind of applications like vibration alarm in telephones.

Can be operated in either direction, simply reverse power supply polarity. Dimensions (not including shaft): 7mm long x 5mm diameter


€ 2.50


Stock:


Quantity  



Vibration Motor Disk Vibe Pager 100% Enclosed

Vibration Motor Disk Vibe Pager 100% Enclosed





Vibration Motor Coin-Type Disk Vibe Pager 100% Enclosed

Disk vibrator with a high vibration capacity and flexible connection wires. 

Unique disk shaped vibration micromotor to make vibration robots or whatever your imagination comes up with.

Diameter 12mm
Thickness 2.7mm
Vibrationspeed 14.000 vibrations each minute
Voltage 1.5v - 3.0 volt DC
Current  50 mA
Weight 1 gram


€ 3.95


Stock:


Quantity  



Micro motor

Micro motor





Micro Motor  - 3 V DC 

Very small micro motor with flexible connection wires. Can be used in small robots, mini cars, small planes or where ever you need a small lightweight propulsion system.


Voltage:3 volt DC
Current:        85 ma
Lenght of motor housing:11 mm
Lenght of shaft:5,1 mm
Diameter:4 mm
Starting voltage:1.7 volt
Turnspeed at 3 volt:57000 turns a minute
Weight: 0.8 gram

Turns either way by changing the polarity.


€ 3.95


Stock:


Quantity  



Mini motor

Mini motor





Mini Motor  - 1.5V - 3 volt DC 

Small mini motor with flexible connection wires. Can be used in small robots, mini cars, small planes or where ever you need a small lightweight propulsion system.

Voltage:1.5 - 3 volt DC
Current:        40 ma
Lenght of motor case: 12 mm
Lenght of shaft:5,3 mm
Diameter:6 mm
Starting voltage:        0,75 volt
turning speed at 1,5 volt:        21000 turns a minute
Weight:1 gram

Turns in two directions by changing the polarity.


€ 4.25


Stock:


Quantity  



Three mini motors

Three mini motors





Three small mini motors in one buy for a friendly price. Ideal to experiment with the different motors to find out which one you can use in your application.

You will receive 1 micromotor, 1 minimotor and 1 disk vibrationmotor. 


€ 9.95


Stock:


Quantity  



Motor 90 degrees with axis on two sides

Motor 90 degrees with axis on two sides



Motor 90 degrees 5V DC with delay and two sided axis. Axis 4mm x 5,5mm.


€ 4.95


Stock:


Quantity  



Motor 90 degrees with axis on one side

Motor 90 degrees with axis on one side



Motor 90 degrees 5V DC with delay and one sided axis. Axis 4mm x 5,5mm.


€ 4.95


Stock:


Quantity  



Mini motor with delay 600 rpm 12 volts

Mini motor with delay 600 rpm 12 volts



Mini motor with delay 600 rpm 12 volt.very smalkl motor. Measurements 25mm long (without axis) x 13mm x 10mm. Diameter axis 3mm.


€ 12.95


Stock:


Quantity  



Mini motor with delay and wheel 100 rpm 12 volts

Mini motor with delay and wheel 100 rpm 12 volts



Mini motor with delay 100 rpm, wheel (42mm diameter en 12mm wide) motor mount bracket. 12 volts 100 rpm. Measurements motor 25mm long (without axis) x 13mm x 10mm. Diameter axis 3mm.


€ 17.95


Stock:


Quantity  



Motor with delay 77rpm 9 volts, wheel 100 and bracket

Motor with delay 77rpm 9 volts, wheel 100 and bracket



Motor with delay 77rpm 9 volts, wheel  (65mm diameter en 26mm wide) and motor mount bracket. Measurements motor 50mm long  x 25mm.


€ 19.95


Stock:


Quantity  



Motor with delay 281rpm 9 volts, wheel 100 and bracket

Motor with delay 281rpm 9 volts, wheel 100 and bracket



Motor with delay 281rpm 9 volts, wheel  (65mm diameter en 26mm wide) and motor mount bracket. Measurements motor 50mm long  x 25mm.


€ 19.95


Stock:


Quantity  



Motor with wheel (65mm diameter)

Motor with wheel (65mm diameter)



Motor 5V DC with delay and with wheel (65mm diameter)


€ 6.95


Stock:


Quantity  



Double speed measuring module encoder

Double speed measuring module encoder



Double speed measuring module encoder photoelectric puls output. 3 Pin output 5 Volts, GND, Out.
Set consists of 2 encoder discs, 2 encoders and connecting wires.


€ 8.95


Stock:


Quantity  



DC motor 3 Volts

DC motor 3 Volts



DC motor 3 Volts. Axis length: 8 mm long and 2mm diam. Measurements 28mm long 17mm high x 20mm wide



€ 2.95


Stock:


Quantity  



DC motor 3-6  Volts

DC motor 3-6 Volts



DC motor 3-6 Volts. Axis length: 8 mm long and 2mm diam. Measurements 25mm x 21mm 



€ 2.95


Stock:


Quantity  



DC motor 3-9 Volt with delay 281 rpm

DC motor 3-9 Volt with delay 281 rpm



DC motor  3-9 Volt with delay 281 rpm. Axis length: 10 mm and 4.5mm diameter. Measurements motor 53mm long 24mm diameter.


€ 12.95


Stock:


Quantity  



DC motor 12 volts

DC motor 12 volts



DC motor 12V DC. Measurements length 35mm x wide 23mm x high 20mm.


€ 1.95


Stock:


Quantity  



DC motor Johnson 9167AH 13,6V DC 170ma

DC motor Johnson 9167AH 13,6V DC 170ma



DC motor Johnson 9167AH 13,6V DC 170ma (free running). 5400 turns per minute.

Axis measurements: 3,2 x 17 mm. Housing measurements: 37 x 50 mm


€ 6.95


Stock:


Quantity  



DC motor Johnson 9167AJ 6V - 24V DC 340ma

DC motor Johnson 9167AJ 6V - 24V DC 340ma



DC motor Johnson 9167AJ 6V -24V DC 340ma (free running). 14000 turns per minute.

Axis measurements: 3 x 17 mm. Housing measurements: 35 x 50 mm


€ 6.95


Stock:


Quantity  



DC motor Johnson 9167AK 8V - 20V DC 330ma

DC motor Johnson 9167AK 8V - 20V DC 330ma



DC motor Johnson 9167AK 8V -20V DC 330ma (free running). 6600 turns per minute.

Axis measurements: 3 x 19 mm. Housing measurements: 37,5 x 57 mm



€ 6.95


Stock:


Quantity  



Stepper motor PM42L-048-MR04

Stepper motor PM42L-048-MR04



Stepper motor 24VDC type PM42L-048-MR04

7.5 DEG/step
Voltage: 24 VDC
Resistance: 4 x 68 ohms
Torque: 0,08 Nm max
Weight: 0,12kg
Termination: 6 wires with connector
Manufactured by NMB – Minebea Electronics 
Has gear on shaft.
Leads are 34 cm (13") long


€ 14.95


Stock:


Quantity  



DC Steppermotor driver L9110S H bridge

DC Steppermotor driver L9110S H bridge



DC Steppermotor driver L9110S H bridge. Wide range of power supply: 2.5V to 12V. Each channel has a continuous output current 800 ma ability; TTL/CMOS compatible output level, can be connected directly to the CPU. Control and drive integration with IC. Module can drive two DC motor or one 4-wire-2-phase stepper motors


€ 6.95


Stock:


Quantity  



4 phase Stepper motor 5 volt with ULN2003 motordriver

4 phase Stepper motor 5 volt with ULN2003 motordriver



4 phase Stepper motor 5 volts with ULN2003 motordriver. Connections motordriver> VDD, IN1, IN2, IN3, IN4, GND


€ 6.95


Stock:


Quantity  



Stepper motordriver ULN2003

Stepper motordriver ULN2003



Stepper motordriver ULN2003. Connections motordriver> VDD, IN1, IN2, IN3, IN4, GND


€ 2.95


Stock:


Quantity  



DC Steppermotor driver L9110S H bridge

DC Steppermotor driver L9110S H bridge



DC Steppermotor driver L9110S H bridge. Wide range of power supply: 2.5V to 12V. Each channel has a continuous output current 800 ma ability; TTL/CMOS compatible output level, can be connected directly to the CPU. Control and drive integration with IC. Module can drive two DC motor or one 4-wire-2-phase stepper motors


€ 6.95


Stock:


Quantity  



Motor driver board L298N type 1

Motor driver board L298N type 1



Motor driver board L298N. Outputs Motor A, Motor B, VMS, GND, 5 Volt.Inputs ENA, IN1,IN2,IN3,IN4,ENB. 


€ 8.95


Stock:


Quantity  



CNC shield V3 for Arduino UNO

CNC shield V3 for Arduino UNO



CNC shield V3 for Arduino UNO used for engraving machines


€ 9.95


Stock:


Quantity  



Small analog servo

Small analog servo





Analog servomotor

Small servo, good quality.
Measurements: 22mm x 11mm x 26mm (LxWxH)
Length including two connectionlips = 34mm

Length connection wire 17 cm.
Complete with 4 different servo arms (round, cross, cross, straight)


€ 7.95


Stock:


Quantity  



Micro Servomotor MG90 MG90S

Micro Servomotor MG90 MG90S



Micro Servomotor MG90 MG90S 
Measurements: 23mm x 12mm x 28mm (LxWxH)

Cable 20 cm with connector (3 pins)


€ 8.95


Stock:


Quantity  



Servomotor Futaba S3003 clone

Servomotor Futaba S3003 clone



Servomotor Futaba clone with the same specifications as the S3003 from Futaba.

3 pole ferrite, all nylon gear
Top ball bearing
Operating Voltage: 4.8V~6.0V
Operating speed: 0.23sec/60 degree
Output torque: 3.2kg/cm 4.8V
Dimension:40.4mm*19.8mm*36mm
Weight: 37.2g


€ 9.95


Stock:


Quantity  



Servomotor DM-S0306D 360 degrees 13 KG

Servomotor DM-S0306D 360 degrees 13 KG



Servomotor DM-S0306D 360 degrees 13 KG

Features
High presicion plastic gears;
Futaba,JR,SANWA,Hitec compatible.
Operating Voltage: 4.8V~6V
Speed: 0.13 sec/60deg (4.8v)    0.11sec/60deg (6v)
Torque: 3kg.cm (4.8v)          3.5kg.cm (6v)
Size: 40mmX20mmX38.5mm
Weight: 40gram
Motor: 3 pole Core motor
Gear Train: plastic(POM gear)
Ball Bearing: 2BB
Dead band width: 4usc
Interface: (JR)
Wire length: 30cm
Type: Digital,2BB,


€ 14.95


Stock:


Quantity  



Servomotor MG996 13 KG

Servomotor MG996 13 KG



Servomotor MG996 13 KG

Specifications
table and Shock Proof. - Metal Gear - Double Ball Bearing - Connector Wire Length 300mm 
Weight : 55g
Operating Speed : 0.17sec / 60 degrees (4.8V no load)
Operating Speed : 0.13sec / 60 degrees (6.0V no load)
Stall Torque : 13 kg-cm (180.5 oz-in) at 4.8V 
Stall Torque : 15 kg-cm (208.3 oz-in) at 6V
Gear Type: All Metal Gears
Spline diameter: 5.8 mm


€ 12.95


Stock:


Quantity  



Solinoid PUSH/PULL 6V DC.

Solinoid PUSH/PULL 6V DC.



Solinoid PUSH/PULL 6V DC. Diameter pin one side 1.5mm,  and other side 6mm.


€ 7.95


Stock:


Quantity  



Robot chassis transparant

Robot chassis transparant



Robot chassis transparant with two 5V DC motors, on/off switch and batteryholder. 




€ 14.95


Stock:


Quantity  



Robot chassis black

Robot chassis black



Robot chassis black with two 5V DC motors, on/off switch and batteryholder. 




€ 14.95


Stock:


Quantity  



Propellor 30mm

Propellor 30mm





Propeller diameter 30 mm. Diameter shaft entrance 2 mm.
 


€ 1.49


Stock:


Quantity  



12mm rubber roller

12mm rubber roller



12mm rubber roller for a 2.5 mm shaft. 28mm long




€ 1.95


Stock:


Quantity  



12mm wheel

12mm wheel



12mm wheel for a 2 mm shaft. 




€ 1.25


Stock:


Quantity  



Mad wheel of metal

Mad wheel of metal



Mad wheel of metal. Measurements 32mm x 48mm. Height 18mm.


€ 3.95


Stock:


Quantity  



Wheel 30mm

Wheel 30mm



Wheel 30mm. Measurements: Plate 38mmx32mm. Height 42mm.


€ 2.50


Stock:


Quantity  



35mm wheel

35mm wheel




Set of two



35mm wheel for a 4 mm shaft.

Made of soft PVC for more grip.



€ 1.95


Stock:


Quantity  



61 mm robust wheel

61 mm robust wheel




set of two



61mm robust wheel for a 4 mm shaft.

Made of soft PVC for more grip.



€ 2.95


Stock:


Quantity  



Wheel 65mm yellow for 4mm x 5,5mm axis

Wheel 65mm yellow for 4mm x 5,5mm axis



Wheel 65mm for 4mm x 5,5mm axis with rubber tire for good grip.


€ 2.95


Stock:


Quantity  



Wheel 65mm black for 4mm x 5,5mm axis

Wheel 65mm black for 4mm x 5,5mm axis



Wheel 65mm for 4mm x 5,5mm axis with rubber tire for good grip.


€ 2.95


Stock:


Quantity  



Wheel 85mm metalic blue for 4,5mm axis

Wheel 85mm metalic blue for 4,5mm axis



Wheel 85mm metalic blue for 4,5mm axis with rubber spike tire for good grip.


€ 4.95


Stock:


Quantity  



V belt small 22mm

V belt small 22mm



V belt 1mm high. 22mm diameter.

Philips servicenumber 4822-358-31113



€ 1.25


Stock:


Quantity  



V belt small 30mm

V belt small 30mm



V belt with small tooth on the inside. 3 cm diameter.


€ 0.99


Stock:


Quantity  



V belt

V belt




V belt with small tooth on the inside. Length 49cm round. Hight of belt is 4mm.


€ 1.95


Stock:


Quantity