ASCII VT100 video terminal building kit

DIY buidling kit!

ASCII VT100  video terminal building kit
Euro 39.95 *Prices include VAT
Article codeZ4-J-M
Building Kit ASCII VT100 compatible video terminal DIY soldering kit. The Kit contains all the needed  components and the already programmed microcontroller.

Ideal interface to connect your microcontroller with a VGA monitor (or a composite videomonitor), standard PS2 keyboard and USB.

Specifications
  • Single chip ASCII video display terminal with VT100 and VT52 emulation
  • VGA or Composite Video output with automatic switch over. Composite can be PAL or NTSC.
  • VGA can display 24 lines x 80 characters or an extended resolution of 36 lines x 80 characters
  • Composite video can display 18 lines x 48 characters (PAL) or 15 lines x 44 characters (NTSC)
  • Standard PS2 compatible keyboard input with support for standard US keyboard layout or French, German, Italian, Belgian, Russian or United Kingdom keyboard layouts
  • TTL or RS232 serial input/output. Baud rates from 40 to 1,000,000 bits per second with odd, even or no parity and one or two stop bits
  • USB input with serial emulation. This can be used as a USB to serial converter
  • Extended VT100 terminal emulation. Extensions include graphics codes for drawing lines, boxes and circles (which can be hollow or filled)
  • Graphics resolution is 480x288 pixels in VGA 25 line mode, 480x432 pixels in VGA 36 line mode, 288x216 in PAL composite and 264x180 pixels in NTSC composite mode
  • Three built in fonts (standard, large and jumbo) and four character attributes (normal, underline, reverse and invisible)
  • Power requirement is 5V at 50mA plus any current drawn from the 3.3V pin on the serial connector  

Building Kit ASCII VT100 compatible video terminal DIY soldering kit. Ideal interface to connect your microcontroller with a VGA monitor (or a composite videomonitor), standard PS2 keyboard and USB.
The Kit contains all the needed  components and the already programmed microcontroller.

Specifications
Single chip ASCII video display terminal with VT100 and VT52 emulation
VGA or Composite Video output with automatic switch over. Composite can be PAL or NTSC.
VGA can display 24 lines x 80 characters or an extended resolution of 36 lines x 80 characters
Composite video can display 18 lines x 48 characters (PAL) or 15 lines x 44 characters (NTSC)
Standard PS2 compatible keyboard input with support for standard US keyboard layout or French, German, Italian, Belgian, Russian or United Kingdom keyboard layouts
TTL or RS232 serial input/output. Baud rates from 40 to 1,000,000 bits per second with odd, even or no parity and one or two stop bits
USB input with serial emulation. This can be used as a USB to serial converter
Extended VT100 terminal emulation. Extensions include graphics codes for drawing lines, boxes and circles (which can be hollow or filled)
Graphics resolution is 480x288 pixels in VGA 25 line mode, 480x432 pixels in VGA 36 line mode, 288x216 in PAL composite and 264x180 pixels in NTSC composite mode
Three built in fonts (standard, large and jumbo) and four character attributes (normal, underline, reverse and invisible)
Power requirement is 5V at 50mA plus any current drawn from the 3.3V pin on the serial connector  

Download construction manual
Download manual
USB driver
Terminal excape codes